Following years of dedicated research, Apex Industrial Chemicals Limited have established a portfolio of products designed specifically for the challenging marine environment. Covering the entire scope of chemical requirements, we are in a unique position to offer a cost effective, direct supply solution to all types of vessels.
Apex Industrial Chemicals offer a variety of products specific to the marine industry. Through many years of business operations and with continued development, obtained through discussion with the industry and research, we have a portfolio of products to provide a resolution to all your marine requirements, from general cleaning to more specific equipment maintenance operations. Strong consideration is given to the health and safety aspects and the environmental aspects of each of our products, starting with the design and development phases and running right through the process to manufacture and by utilising the most up to date chemistry available in the marketplace.
So that all ecotoxicity, biodegradation and bioaccumulation potential data used has a significant “safety buffer” above the MARPOL/ GHS requirements, we avoid the use of components adversely classified under the REACH Regulation.
CC48 - A double action rust converter and steel primer intended to give long term protection against corrosion when suitably over coated. This product converts existing adherent rust to a hard, non-reactive complex and then lays over this a layer of resin and pigment ready to receive any single pack top coat.
Anticorrosion
PP19 - Rapidly dewaters metal surfaces and protects electrical connections against shorting in damp environments. Effectively protects against salt encrustation and provides penetrating lubrication to small or intricate mechanisms.
Anticorrosion
PP20 - Tough waxy film provides good long-term protection of steel, etc., against humid and salty environments. Easily recoatable as required and easily removable for maintenance purposes.
Anticorrosion
RR26 - Specifically designed to convert rust into a stable inert film. RC Wash is ideal for converting rusty steel especially where sand or grit blasting is not possible due to cost, accessibility or environmental concerns.
Anticorrosion
BB21 - BW Inhibitor is completely soluble in sea-water and forms a tightly bonded protective film on surfaces below water level.
Ballast Water Treatment
MM20 - Highly effective bio-dispersant additive for sea-water, whether used in static or flowing systems. Prevents the adhesion of algae, shellfish and micro-organisms, thus controlling fouling of sea-water systems.
Ballast Water Treatment
AA17 - Carefully selected emulsifiable solvent based technology to safely replace harmful chlorinated hydrocarbon formula to remove dust, greasy carbon deposits and oil fumes from air coolers.
Equipment Cleaning
CC49 - Centri-Clean effectively and thoroughly softens and removes the heavy tenacious deposits that bind to the discs and stack of centrifugal separators used for fuel and lube oil treatment.
Equipment Cleaning
CC50 - A multi-metal corrosion inhibitor for engine-cooling water, closed cooling systems and chilled water systems. (NOTE: this is an industrial product NOT to be dosed to potable water systems).
Fuel & Engine Cooling/Treatments
FF03 - A highly effective biocide additive for fuel tanks and bunkerage, equally eradicate aerobic and anaerobic bacteria in the water phase and at the interface. Powerful Fuel-Cide Separates into lower water layer, preventing microbial growth including SRB to prevents microbial induced corrosion which can lead to tank/ pipe failures and filter blocking due to slimes.
Fuel & Engine Cooling/Treatments
PP24 - A specially formulated product for the dosing of potable water for accommodation on ships.
Potable Water/System Treatments
PP23 - An environmentally friendly formulation of inorganic salt material, which possess water stabilising properties. Low marine toxicity, naturally occurring salts cause no added harm to the environment.
Potable Water/System Treatments
PP21 - Designed for shock-dose treatment before returning potable water tanks and facilities to use after repair or maintenance. PW Tank-Chlor maintains its original chlorine level longer than ordinary solutions of hypochlorite and similar materials.
Potable Water/System Treatments
PP22 - Designed especially for use in Processes for the sterilisation of potable (drinking) water tanks and associated pipework, PW Tank-Dechlor quickly and safely destroys residual Chlorine in the used waters and rinsings, thus allowing simple and safe disposal to normal waste streams without breaching the environmental authority's rules.
Potable Water/System Treatments
AA03 - Part of the Apex Marine range of products, Alu-Brite is especially designed to clean and brighten aluminium and aluminium alloy parts safely. Suitable for cleaning all components in ships from large vertical surfaces to small, individual items, versatile Alu-Brite is easily applied by brushing, flooding, low-pressure spraying or immersion. May be used neat or diluted as desired.
Surface Cleaning & Treatment
DD23 - Embedded crystals of soluble chlorides and sulphates can interfere with paint Overcoating and promote corrosion of steel beneath painted surfaces. Effective De-Salt X when added to rinse or blast water can eliminate this risk.
Surface Cleaning & Treatment
EE13 - An effective, ready-to-use, emulsifiable solvent degreaser, ER Degreaser removes the most stubborn oily or greasy dirt from machinery, engine parts, bilges and equipment and then rinses easily away with water.
Surface Cleaning & Treatment
SS54 - Non-flammable citrus based SONIC combines effective cleaning and degreasing power with environmentally friendly formulation. Safely replacing old-fashioned paraffin and chlorinated type products, SONIC is water rinsable and ideal for use on engines, equipment, machinery, decks, bulkheads, etc.
Surface Cleaning & Treatment
Effective cleaning of slipways and decks.
Surface Cleaning & Treatment
Contact us for further information on this product.
Test Kits
Chlorine Range 0-250 mg/L
Test Kits
Chlorine Range 0-500 mg/L
Test Kits
Kit to help determine the level of microbiological contamination in your fuel.
Test Kits
Call or email for further information on any of our products.
Contact Us