Industrial Products
Apex Industrial Chemicals Limited Manufacture & Supply specially formulated chemical products to a variety of Industries. Our chemicals are utilised for day-to-day industrial operations, through to personal hygiene. From vehicle care through to equipment maintenance. From vehicle care through to lubrication and protection. From hygienic cleansers and Sanitisers through to specific products relating to inclement weather.
CRETE-CLEAN
Crete-Clean penetrates & removes greasy soiling & leaves floors with a clean, whitened surface.
CRETE COTE - CC06
Protect concrete, stone or wooden surfaces, from water, oil, grease & dirt.
DECHLORINATOR - DD06
A treatment for the eradication of free chlorine from sterilised waters before these may be released to effluent.
LINE MARKER - LO1
A lead-free, acrylic based aerosol paint for line marking, whether free-hand or by wheeled applicator. (Available in white/black).
OIL SORB - SSS12
Non-flammable granular multi-pur-pose absorbent for the remediation of spillages.
CAPTOR - SSS47
For the control of oil, paraffin or solvent spillages.
ORBIT- OO10
A concentrated, mild alkaline cleaner, for cleaning hard floor surfaces such as P.V.C, rubber compositions & sealed or unsealed stone or concrete.
PATH-KLEER - PP04
Powerful Path-Kleer, with special
"Active heating"melts ice and snow many times more rapidly than conventional rock- salt. Handy Path-Kleer is simply sprinkled down and left to work - contains no sand or grit to leave dirty marks all over paths, steps & doorways.
STERI-TANK - SS18
Designed especially for the sterilisation of drinking water tanks and associated pipework. Steri-Tank is carefully designed to take the guesswork out of treatment work by offering a simple dosage of one litre per cubic metre (1000 litres) of system capacity.
VANOPH - VV01
Vanoph is a gel designed to dissolve biro and felt-tip pen marks and soften many types of paint, while being mild enough to allow use on many plastics and some types of painted surface.
ALGAE CLEANER
For cleaning algae, lichen and moss from walls, driveways, lock block & paving.
WASH-OUT - WUJ03
Chemical cure for organic drain blockages.
PATIO CLEANER
Concentrated cleaner for cleaning algae, lichen & moss from patios.
DE-SCALE - DD03
De-Scale - dissolving calcium & magnesium scales, removing efflorescence & mortar splashes & clearing rusty stains. Also available DD21 XP & DD04 XX concentrated.
De-scale xp - DD21
A fast-acting and effective product for the removal of cement and mortar splashes, efflorescence, lime-scale and rusty marks from a wide variety of equipment and building surfaces. De-Scale XP's powerful dissolving action handles deposits other products cannot touch but is totally free from the fuming behaviour that makes other products a nuisance to work with.
Ec5662 - EE09
A general purpose, heavy duty, cleaning and degreasing solvent.
Line marker - LO1
A lead-free, acrylic based aerosol paint for line marking, whether freehand or by wheeled applicator. Useful for marking-out in car parks,
tennis/squash courts, warehouses, etc, both indoors and out, (available in white/ yellow/red).
M.r.o - MM06
A combined action release agent for use on forms and shuttering used for the moulding of concrete, mortar, plaster and similar water-based materials. M.R.O should be used neat on wood, steel or aluminium moulds and shuttering to give excellent surface finish, especially where highly textured, and freedom from staining.
Pro-coat - PP10
Provides a sacrificial release coating which prevents bitumen, tar & heavy oils adhering to metal or painted metal surfaces.
Quell - QQ01
A specially developed concentrate for addition to dampening/ dust-suppression spray water. Quell's double action formula not only provides effective control dust on the day but also keeps it under control for longer than is achievable with plain water.
CI-5547G - CCOl
A special corrosion inhibitor and biocidal solution for use in bott static and circulating process water systems. CI-5547G is formulated complete with Fluorescent Marker D thus also enabling its use in leak detecting applications.
D.p.r - DD09
With penetrating, easing, water-displacing, lubricating & corrosion-preventing properties.
Galve Cote - GG01
Primer for bare steel, protecting surfaces from corrosion by its "sacrificial" electrical action.
Galve Cote S - G04
Aerosol is especially recommended for smaller areas.
Mpl 40 - MM13
Useful, multi-purpose product with penetrating, easing, water-displacing, lubricating and corrosion-preventing properties. Loosens seized nuts and bolts and lubricated hinges, guns, mechanical movements.
Provides medium term protection against corrosion during indoor storage.
Anti- Splatter - AA10
Water based non-flammable product to prevent the adhesion of welding splatter to the work-piece & to any jigs, shrouds, nozzles or adapters & other metal parts in the immediate vicinity.
CI-5547 - CC27
Designed to prevent corrosion by the formation of a protective mor molecular film on metal surfaces. It is ideal for use as an additive to water be used for static pressure testing of valves and tanks, leak-finding in tank and pipework systems and for the protection of stored water systems for fire-fighting, process cooling, etc.
CI-5547G - CCOl
A special corrosion inhibiting and biocidal solution for use in both static and circulating process water systems. Cl-5547G is formulated complete with Fluorescent Marker Dye, thus also enabling its use in leak detecting applications.
Cool cut - CC04
Multi-purpose lubricant & coolant fluid for use in most metal machining operations.
Cuproplate 100 - CC08
Offers a quick & effective reaction with suitable clean & grease-free surfaces. Often used to give a cold-applied coating of copper on screw-threads and other areas of mild steels.
Cut & Tap - CC02
Aerosol tool tip cooling & lubrication for tapping & drilling operations on a range of metals.
Diluent solvent - DD24
A thinner for lubricating oils, intended to assist in wear-tests & foreign particle inspections after extended use periods.
Dry film lube - D03
Aerosol spray gives a quick-dry-ing, black or dark grey coating, with graphite & P.T.F.E to provide a long-lasting & durable lubricant coating.
Galve cote - G03
Galve Cote is a primer for bare steel, it protects steel surfaces from corrosion by its sacrificial electrical action. It can be used as a shop primer or coating for steel pipes and fabrications.
Galve Cote - SG04
Galve Cote S Aerosol is especially recommended for smaller areas. This aerosol is ideal for patching work, such as after new welding of galvanised sections or otherwise where galvanising has been stripped.
Spraybooth additive - SS33
Spraybooth Additive, dosed at low levels into the water used in these systems, "denatures" any paint emulsions formed, allowing easier and effective skimming of the excess paint from the circulating water, This product also delivers broad-spectrum biocidal activity which effectively controls the growth of algae, fungi and bacteria in the system, Including S.R.B.
Stencil paint - S08
A fast-drying aerosol spray ink which is ideal for stencilling and other marking or identification activities.
Stencil Paint provides rapid and easy identification of items and containers for shipment and reliable presentation of lot, batch or status identification numbers. It may also be used to mark control and hazard warnings, valve identification/ direction of actuation indications and brief working instructions. (available in white/black/green).
Super bond - S06
A heavy-duty aerosol adhesive suitable for a wide range of demanding uses. Fitted with a variable-discharge actuator which controls the width of the spray-fan, easily used for both smaller, intricate parts and for larger area coverage.
Ideal for use in the furniture, flooring and automotive industries, especially for bonding foam to a wide variety of surfaces. Equally suitable for use in all repair and non-structural applications where a high-strength bond is required quickly.
Alu-clean
Cleaner, brightener & remover for scale & tarnish from aluminium & aluminium alloy parts.
Bot-u-solv - BB17
Bit-U-Solv is an extremely effective Tar, Bitumen and Crude Oil Remover.
Clean - All - CC18
Heavy duty cleaner & degreaser for use when deposits cannot easily be removed by ordinary detergents.
Degrease - DD02
Solvent-based degreaser & cleaner suitable for use as a bodywork de-waxer for new vehicles, & ideal for use in machine shops.
DX20 - DD15
Ready-to-use, emulsifiable solvent degreaser, removes oily dirt from engines, machine parts, plant & equipment & easily rinses away with water.
DX60- DD08 - DD15
An effective, ready-to-use, emulsifiable solvent degreaser,
DX-60 removes the most stubborn oily or greasy dirt from engines, machine parts, plant and equipment and then easily rinses away with water.
Ec5662 - EE09
A general purpose, heavy duty, cleaning and degreasing solvent, EC5662 utilises a carefully slowed evaporation rate to carry the maximum amount of greasy soil without re- deposition and leaves no residue on ultimate evaporation.
Eco wash 3000 - EE12
For use with High Pressure Water jets where parts cleanliness is paramount, and environmental care is essential. Eco Wash 3000 will clean and degrease decks, floors, bulkheads, tanks, vehicles, machinery, equipment, etc.
Eco-Force - EE03
A rapid drying solvent cleaner and degreaser for the removal of oily and greasy dirt, moisture, gums and resins from a wide variety of surfaces.
Eco-Force contains no ozone depleting substances.
Eco-Solv - EE08
An effective cleaning and degreasing solvent based on natural degradable organic solvents. Design for the removal of oil, grease, moisture and resins/gums from machine par tools, equipment and metals of all sorts, Eco-Solv dries without residue.
Electro - E03
Electro is designed for use as a cleaner and degreaser for the removal of oily and greasy dirt, moisture, gums and resins from a wide variety of surfaces and it also has no ozone depleting substances.
Enviro-Clean a2- EE02
Enviro-Clean A2 effectively emulsifies and removes oil, grease, mud, dirt and grime from most surfaces. Non-flammable, non-caustic makes it safe on common metals and construction materials and is easily used neat or diluted with fresh or sea-water.
Enviro-Clean XX - EE05
Safe, environmentally friendly and non-flammable cleaner and degreaser. Enviro-Clean XX is fully biodegradable and with low marine toxicity. This concentrated product will rapidly remove oil, grease, dirt and drilling mud residues from machinery, equipment, modules as well as decks, holds and superstructures on ships.
Fast Clean - C02
For machinery & duct degreasing, washing of most types of floor, window cleaning & other applications.
Hm5528 - HH16
Powerful but safe degreasing detergent for decks, floors, vehicles, machinery and equipment. HM5528 is readily water dilutable and capable of cleaning and degreasing decks, floors, bulkheads, tanks, vehicles, machinery, equipment etc. Factory controlled pH ensures that wash-bay effluent will never exceed its pH consent conditions.
Jetclean - JJO1
A cleaning & degreasing product for metal & plastics parts, for use in modern cabinet type jet-washing machines.
Kleen-it-all - KK03
Multi-purpose cleaner designed for the hard-surface cleaning needs of industry.
Orbit
Orbit is a hard floor surface cleaner designed for plastics, rubber compositions and sealed or unsealed concrete floors, it is ideal for scrubbing machines.
Somic 2000 - SS21
A non-flammable degreaser and cleaner combining the properties of degreasing solvents and water based detergent products all in one water dilutable liquid. This environmentally friendly formulation safely replaces old-fashioned paraffin and chlorinated type products, Sonic 2000 is water rinsable and ideal for use on plant, machinery, decks, yards, engines, ships, etc.
Swift - SSI2
A high strength, multi-purpose cleaner and degreaser. Swift is ideal for cleaning, by mop, brush or spray, any surface not affected by water. Swift cleans floors, walls, tiles, linoleum, plastic, metals, engines, vehicles, paintwork, machinery, ovens, grills, cookers, counters, work & table tops, drainers, baking trays and more.
Anti-seize - AA05
Anti-Effectively prevents galling & seizing of bolts, studs, screws, gaskets & joints on furnace equipment, exhaust systems, chemical reactors, kilns, pressure vessels & other applications.
Dpr - DD09
This multi-purpose product has penetrating, easing, water-displacing, lubricating and corrosion-preventing properties. D.P.R will loosen seized nuts and bolts and lubricate hinges, guns, mechanical movements, etc. This product also removes water from all metal surfaces and provides medium term protection against corrosion during indoor storage.
Dry film lube - D03
An aerosol product which sprays to give a quick-drying, black or dark grey coating, formulated with graphite and P.T.F.E in an acrylic binder to provide a long-lasting and durable lubricant coating.
Gear & Rope Lube - GG09
A special lubricating, water-displacing and corrosion preventive fluid for use on wire ropes and associated gear. This product is suitable for use on locked- coil wire ropes in friction and drum-winding configurations, guide and rubbing ropes, haulage and cable-belt ropes, crane & hoist wires etc.
Grease cartridges - GG06
A premium quality multipurpose grease ideal for use in all plain or anti-friction bearings, universal joints, vehicle chassis points and similar areas. Grease Cartridges are recommended for the lubrication of highly loaded industrial and automotive applications.
Guardian - GG08
A heavy, residual compounded lubricant & protective, with excellent adhesive properties.
H.t.l grease - GGIl
A premium non-melting grease especially recommended for use in all plain and rolling bearings, especially those subject to high temperatures & running at high speeds.
Hyper g2 cartridge - HHO1
High performance, multipurpose grease ideal for use in all plain or anti-friction bearings, especially those subjected to moisture, high temperatures, vibration and variable speeds, It has added extreme-pressure, anti-wear, anti-corrosion and anti-oxidation additives to deliver premium performance from this versatile grease.
Lithium grease - LL10
Good quality, multi-purpose grease ideal for use in all plain or anti-friction bearings, universal joints, vehicle chassis points and similar areas. It is also ideal as a general protective for pipe-threads and metal parts in warehouse storage or in transit.
Lubro - LL08
A high performance grease packed with specialised solid lubricants, extreme pressure additives and sulphide inhibitors, Lubro has been formulated to be free from all metal additives. Lubro is ideally suited for use as a "thread compound" providing good control of make/break torque and protecting metal surfaces effectively even in wet and extremely corrosive conditions.
Mpl - 40 - MM13
Multi-purpose product with penetrating, easing, water-displacing, lubricating & corrosion-preventing properties
Multi lube - MOl
An Aerosol product delivering a viscosified oil packed with solid lubricants. Multi Lube is ideal for use when heavier lubrication is needed but greases may not give the necessary penetration into intricate mechanisms, etc. This product is ideal for lubrication of drive chains, small mechanisms, locks and similar items.
Never-seize - NNO1
A specialised lubricant, anti-seize and anti-galling product for use in situations of high temperature (Up to 800 degrees), corrosivity and pressure.
Never-Seize is a non-melting grease filled with microscopic aluminium flakes, which provides good electrical conductivity between metal parts and prevents threads, especially, binding or seizing together.
Petroleum jelly - PP01
For the general protection of all metal parts from corrosion in storage.
Release - RR03
A fast acting penetrating, easing and lubricating fluid, Release rapidly allows the movement of tight or seized screws, nuts, bolts, hinges and all similar sorts of fitting or mechanism.This allows parts to be disassembled for repair, etc., with the minimum of effort and damage.
Shredder Lube lv - SS56
A special lubricating fluid for paper-shredders. Regular use will maintain shredder heads in optimum condition and prevent sticking and jamming due to paper-dust build-up.
Low viscosity Shredder Lube LV allows easy use via in-built sump applicators but equally may be simply applied to smaller shredders by dropper or fine brush.
Silicone - SS03
A specially selected, narrow-cut poly-dimethyl-siloxane fluid with a very wide range of applications as a lubricant, release agent and polishing or shining agent, especially for plastics surfaces. Silicone is pure silicone oil, free from solvents and thinners so it offers maximum performance and maximum value for money.
Silicone emulsion - SS13
Silicone emulsion is specially designed for use where the clean, effective properties of silicones are required, but in a water based form. It functions as a lubricant, mould release agent and anti-foam. This specific product finds a special place in the clothing industry for example, where it provides machinery lubrication without staining.
Silicone grease - SS04
Lubricates, protects from water & aggressive chemical attack & used as a mould release for small-scale applications.
Tef a100 - TO1
TEF A100 is a multi-purpose product with penetrating, easing, water-displacing, lubricating and corrosion-preventing properties. TEF A100 will loosen seized nuts and bolts and lubricate hinges, guns, mechanical movements, etc. This product removes water from all metal surfaces and provides medium term protection against corrosion.
Tef2000 - TT04
Lubricant fluid, designed for applications where high film strength coupled with low viscosity may be critical.
White grease - W01
White Grease is ideal for the lubrication of locks, hinges and mechanisms of all sorts and is especially suited for use around vehicle doors and similar situations. Inclusion of a fast-drying solvent ensures effective penetration into hinges, crevices and so on for maximum lubrication.
Alu clean - AA02
Alu Clean is a safe, fast-acting cleaner, brightener and remover for scale & tarnish from aluminium and aluminium alloy parts. Suitable for cleaning all components, from large vertical surfaces to small, individual items.
Rustex - RR05
Concentrated Rustex is specially formulated to effectively remove rust, scale and other corrosion deposits from mild steel and other acid-resistant surfaces such as plastics, ceramics or stone. Fast acting Rustex is fully inhibited to ensure quick and effective removal of corrosion without affecting the steel.
Rustex-Gel - RR06
A powerful ready-to-use gel, designed for the removal of rust, scale and corrosion deposits from most metal surfaces. Rustex-Gel is suitable for use on all ferrous metals, yellow metals and, with care, even on aluminium. This formulation allows it to be effectively used on horizontal, vertical and even overhead surfaces.
Rustex-P - RR13
Concentrated Rustex-P is formulated to effectively remove rust, scale and other corrosion deposits from a wide variety of metals and other acid-resistant surfaces such as plastics, ceramics or stone. It has a non-fuming and much less aggressive formulation than other rust removers, which allows extensive use even in the catering and food processing industries.
Steel Brite - SS14
A general purpose cleaner for stainless steel surfaces, such as kitchen and canteen worktops, sinks, fascias, doors, etc. Mild but effective Steel Brite removes greasy marks and stains, finger-marks, etc, without leaving surface streaks. Leaves surfaces clean & bright without any risk of taint to foodstuffs. Steel Brite finds uses throughout the catering trades, in kitchens and canteens, and in hotels or offices, wherever there are stainless steel doors, counters and so on.
Acetone - AA07
This material is supplied only for the following uses. For pre-paint degreasing of metals, for use as a paint thinner and for use as a brush or paint-spray equipment cleaner.
INDUSTRIAL THINNERS - 1102
Industrial Thinners are carefully prepared from pure, high grade solvents to ensure compatibility across the wide range of available cellulose re-finishing materials. They are also formulated to provide excellent gloss straight from the gun. This Product is recommended for local repair work and is also suitable for gun-wash and general clean-up work on a wide range of materials.
Iso-propanol - 1106
This material is supplied only for the following uses. For pre-paint degreasing of metals, for use as a paint thinner and for use as a brush or paint-spray equipment cleaner.
Mek - MM09
Also known as Butan-2-one.
This material is supplied only for the following uses. For pre-paint degreasing of metals, for use as a paint thinner and for use as a brush or paint-spray equipment cleaner.
Toluene - TT12
This material is supplied only for the following uses. For pre-paint degreasing of metals, for use as a paint thinner and for use as a brush or paint-spray equipment cleaner.
Vanoph-VV01
Mild gel designed to dissolve biro and felt-tip pen marks and soften many types of paint.
Combat - СС03
A water-based, low hazard product for the removal of printing ink residues from print machinery and surrounding areas. Combat can also be used as a general hard surface cleaner where its alkalinity is beneficial.
Hypo 11 - HH08
Hypo 11 eliminates microbial contamination from freshly cleaned working surfaces, utensils, equipment and building surfaces such as floors and walls. Hypo 1l has many uses in the food and beverage processing industries, catering trades, hospitals and nursing homes and wherever else that hygiene is important. Hypo 11 yields at least 11% Sodium Hypochlorite.
Hypo 15 - НН05
Hypo 15 eliminates microbial contamination from freshly cleaned working surfaces, utensils, equipment and building surfaces such as floors and walls. Hypo 15 has many uses in the food and beverage processing industries, catering trades, hospitals and nursing homes and wherever else that hygiene is important. Hypo 15 yields at least 15% Sodium Hypochlorite.
Mask it - MM01
Water-soluble Mask-it provides deodorising and odour-masking power for Sewage Treatment Works, Refuse Vehicles, Skips & Tips, Offal Processing factories and anywhere with problem offensive odours for workers or the surrounding population.
Odor-izer - OO03 & OO05 & OO06
Odor-Izor is available in an "Apple" fragrance, a"Peach" fragrance and a "Cherry" fragrance. A concentrated re-odouriser, for the control of noxious odours on various hard surfaces and above tanks, filter-beds, etc.
Odour mask - 0001
A highly concentrated masking agent, Odour Mask controls all sorts of noxious odours in the Sewage, Waste, Farming, Fishing and similar industries.
Odour Mask can be used to deodorise sewage ponds, septic tanks, refuse tips, skips and vehicles, offal processing plants and anywhere else where odours are a problem.
Stencil Paint - S08
A fast-drying aerosol spray ink which is ideal for stencilling and other marking or identification activities.
Stencil Paint provides rapid and easy identification of items and containers for shipment and reliable presentation of lot, batch or status identification numbers. It may also be used to mark control and hazard warnings, valve identification/ direction of actuation indications and brief working instructions. (available in white/black/red/green).
Terminate - TT05
Terminates unique triple-action initially emulsifies oils and fats allowing a more rapid start to their biodegradation in digesters. Throughout the system, Terminates special agents bind to "smelly" molecules and prevent their release - making this a true de-odourising product, not just a mask. In slow-moving streams and equipment such as sludge separators, terminate releases a floating, fragrant film which further traps odours.
CRETE-CLEAN
Crete-Clean penetrates & removes greasy soiling & leaves floors with a clean, whitened surface.
CRETE COTE - CC06
Protect concrete, stone or wooden surfaces, from water, oil, grease & dirt.
DECHLORINATOR - DD06
A treatment for the eradication of free chlorine from sterilised waters before these may be released to effluent.
LINE MARKER - LO1
A lead-free, acrylic based aerosol paint for line marking, whether free-hand or by wheeled applicator. (Available in white/black).
OIL SORB - SSS12
Non-flammable granular multi-pur-pose absorbent for the remediation of spillages.
CAPTOR - SSS47
For the control of oil, paraffin or solvent spillages.
ORBIT- OO10
A concentrated, mild alkaline cleaner, for cleaning hard floor surfaces such as P.V.C, rubber compositions & sealed or unsealed stone or concrete.
PATH-KLEER - PP04
Powerful Path-Kleer, with special
"Active heating"melts ice and snow many times more rapidly than conventional rock- salt. Handy Path-Kleer is simply sprinkled down and left to work - contains no sand or grit to leave dirty marks all over paths, steps & doorways.
STERI-TANK - SS18
Designed especially for the sterilisation of drinking water tanks and associated pipework. Steri-Tank is carefully designed to take the guesswork out of treatment work by offering a simple dosage of one litre per cubic metre (1000 litres) of system capacity.
VANOPH - VV01
Vanoph is a gel designed to dissolve biro and felt-tip pen marks and soften many types of paint, while being mild enough to allow use on many plastics and some types of painted surface.
ALGAE CLEANER
For cleaning algae, lichen and moss from walls, driveways, lock block & paving.
WASH-OUT - WUJ03
Chemical cure for organic drain blockages.
PATIO CLEANER
Concentrated cleaner for cleaning algae, lichen & moss from patios.
DE-SCALE - DD03
De-Scale - dissolving calcium & magnesium scales, removing efflorescence & mortar splashes & clearing rusty stains. Also available DD21 XP & DD04 XX concentrated.
De-scale xp - DD21
A fast-acting and effective product for the removal of cement and mortar splashes, efflorescence, lime-scale and rusty marks from a wide variety of equipment and building surfaces. De-Scale XP's powerful dissolving action handles deposits other products cannot touch but is totally free from the fuming behaviour that makes other products a nuisance to work with.
Ec5662 - EE09
A general purpose, heavy duty, cleaning and degreasing solvent.
Line marker - LO1
A lead-free, acrylic based aerosol paint for line marking, whether freehand or by wheeled applicator. Useful for marking-out in car parks,
tennis/squash courts, warehouses, etc, both indoors and out, (available in white/ yellow/red).
M.r.o - MM06
A combined action release agent for use on forms and shuttering used for the moulding of concrete, mortar, plaster and similar water-based materials. M.R.O should be used neat on wood, steel or aluminium moulds and shuttering to give excellent surface finish, especially where highly textured, and freedom from staining.
Pro-coat - PP10
Provides a sacrificial release coating which prevents bitumen, tar & heavy oils adhering to metal or painted metal surfaces.
Quell - QQ01
A specially developed concentrate for addition to dampening/ dust-suppression spray water. Quell's double action formula not only provides effective control dust on the day but also keeps it under control for longer than is achievable with plain water.
CI-5547G - CCOl
A special corrosion inhibitor and biocidal solution for use in bott static and circulating process water systems. CI-5547G is formulated complete with Fluorescent Marker D thus also enabling its use in leak detecting applications.
D.p.r - DD09
With penetrating, easing, water-displacing, lubricating & corrosion-preventing properties.
Galve Cote - GG01
Primer for bare steel, protecting surfaces from corrosion by its "sacrificial" electrical action.
Galve Cote S - G04
Aerosol is especially recommended for smaller areas.
Mpl 40 - MM13
Useful, multi-purpose product with penetrating, easing, water-displacing, lubricating and corrosion-preventing properties. Loosens seized nuts and bolts and lubricated hinges, guns, mechanical movements.
Provides medium term protection against corrosion during indoor storage.
Anti- Splatter - AA10
Water based non-flammable product to prevent the adhesion of welding splatter to the work-piece & to any jigs, shrouds, nozzles or adapters & other metal parts in the immediate vicinity.
CI-5547 - CC27
Designed to prevent corrosion by the formation of a protective mor molecular film on metal surfaces. It is ideal for use as an additive to water be used for static pressure testing of valves and tanks, leak-finding in tank and pipework systems and for the protection of stored water systems for fire-fighting, process cooling, etc.
CI-5547G - CCOl
A special corrosion inhibiting and biocidal solution for use in both static and circulating process water systems. Cl-5547G is formulated complete with Fluorescent Marker Dye, thus also enabling its use in leak detecting applications.
Cool cut - CC04
Multi-purpose lubricant & coolant fluid for use in most metal machining operations.
Cuproplate 100 - CC08
Offers a quick & effective reaction with suitable clean & grease-free surfaces. Often used to give a cold-applied coating of copper on screw-threads and other areas of mild steels.
Cut & Tap - CC02
Aerosol tool tip cooling & lubrication for tapping & drilling operations on a range of metals.
Diluent solvent - DD24
A thinner for lubricating oils, intended to assist in wear-tests & foreign particle inspections after extended use periods.
Dry film lube - D03
Aerosol spray gives a quick-dry-ing, black or dark grey coating, with graphite & P.T.F.E to provide a long-lasting & durable lubricant coating.
Galve cote - G03
Galve Cote is a primer for bare steel, it protects steel surfaces from corrosion by its sacrificial electrical action. It can be used as a shop primer or coating for steel pipes and fabrications.
Galve Cote - SG04
Galve Cote S Aerosol is especially recommended for smaller areas. This aerosol is ideal for patching work, such as after new welding of galvanised sections or otherwise where galvanising has been stripped.
Spraybooth additive - SS33
Spraybooth Additive, dosed at low levels into the water used in these systems, "denatures" any paint emulsions formed, allowing easier and effective skimming of the excess paint from the circulating water, This product also delivers broad-spectrum biocidal activity which effectively controls the growth of algae, fungi and bacteria in the system, Including S.R.B.
Stencil paint - S08
A fast-drying aerosol spray ink which is ideal for stencilling and other marking or identification activities.
Stencil Paint provides rapid and easy identification of items and containers for shipment and reliable presentation of lot, batch or status identification numbers. It may also be used to mark control and hazard warnings, valve identification/ direction of actuation indications and brief working instructions. (available in white/black/green).
Super bond - S06
A heavy-duty aerosol adhesive suitable for a wide range of demanding uses. Fitted with a variable-discharge actuator which controls the width of the spray-fan, easily used for both smaller, intricate parts and for larger area coverage.
Ideal for use in the furniture, flooring and automotive industries, especially for bonding foam to a wide variety of surfaces. Equally suitable for use in all repair and non-structural applications where a high-strength bond is required quickly.
Alu-clean
Cleaner, brightener & remover for scale & tarnish from aluminium & aluminium alloy parts.
Bot-u-solv - BB17
Bit-U-Solv is an extremely effective Tar, Bitumen and Crude Oil Remover.
Clean - All - CC18
Heavy duty cleaner & degreaser for use when deposits cannot easily be removed by ordinary detergents.
Degrease - DD02
Solvent-based degreaser & cleaner suitable for use as a bodywork de-waxer for new vehicles, & ideal for use in machine shops.
DX20 - DD15
Ready-to-use, emulsifiable solvent degreaser, removes oily dirt from engines, machine parts, plant & equipment & easily rinses away with water.
DX60- DD08 - DD15
An effective, ready-to-use, emulsifiable solvent degreaser,
DX-60 removes the most stubborn oily or greasy dirt from engines, machine parts, plant and equipment and then easily rinses away with water.
Ec5662 - EE09
A general purpose, heavy duty, cleaning and degreasing solvent, EC5662 utilises a carefully slowed evaporation rate to carry the maximum amount of greasy soil without re- deposition and leaves no residue on ultimate evaporation.
Eco wash 3000 - EE12
For use with High Pressure Water jets where parts cleanliness is paramount, and environmental care is essential. Eco Wash 3000 will clean and degrease decks, floors, bulkheads, tanks, vehicles, machinery, equipment, etc.
Eco-Force - EE03
A rapid drying solvent cleaner and degreaser for the removal of oily and greasy dirt, moisture, gums and resins from a wide variety of surfaces.
Eco-Force contains no ozone depleting substances.
Eco-Solv - EE08
An effective cleaning and degreasing solvent based on natural degradable organic solvents. Design for the removal of oil, grease, moisture and resins/gums from machine par tools, equipment and metals of all sorts, Eco-Solv dries without residue.
Electro - E03
Electro is designed for use as a cleaner and degreaser for the removal of oily and greasy dirt, moisture, gums and resins from a wide variety of surfaces and it also has no ozone depleting substances.
Enviro-Clean a2- EE02
Enviro-Clean A2 effectively emulsifies and removes oil, grease, mud, dirt and grime from most surfaces. Non-flammable, non-caustic makes it safe on common metals and construction materials and is easily used neat or diluted with fresh or sea-water.
Enviro-Clean XX - EE05
Safe, environmentally friendly and non-flammable cleaner and degreaser. Enviro-Clean XX is fully biodegradable and with low marine toxicity. This concentrated product will rapidly remove oil, grease, dirt and drilling mud residues from machinery, equipment, modules as well as decks, holds and superstructures on ships.
Fast Clean - C02
For machinery & duct degreasing, washing of most types of floor, window cleaning & other applications.
Hm5528 - HH16
Powerful but safe degreasing detergent for decks, floors, vehicles, machinery and equipment. HM5528 is readily water dilutable and capable of cleaning and degreasing decks, floors, bulkheads, tanks, vehicles, machinery, equipment etc. Factory controlled pH ensures that wash-bay effluent will never exceed its pH consent conditions.
Jetclean - JJO1
A cleaning & degreasing product for metal & plastics parts, for use in modern cabinet type jet-washing machines.
Kleen-it-all - KK03
Multi-purpose cleaner designed for the hard-surface cleaning needs of industry.
Orbit
Orbit is a hard floor surface cleaner designed for plastics, rubber compositions and sealed or unsealed concrete floors, it is ideal for scrubbing machines.
Somic 2000 - SS21
A non-flammable degreaser and cleaner combining the properties of degreasing solvents and water based detergent products all in one water dilutable liquid. This environmentally friendly formulation safely replaces old-fashioned paraffin and chlorinated type products, Sonic 2000 is water rinsable and ideal for use on plant, machinery, decks, yards, engines, ships, etc.
Swift - SSI2
A high strength, multi-purpose cleaner and degreaser. Swift is ideal for cleaning, by mop, brush or spray, any surface not affected by water. Swift cleans floors, walls, tiles, linoleum, plastic, metals, engines, vehicles, paintwork, machinery, ovens, grills, cookers, counters, work & table tops, drainers, baking trays and more.
Anti-seize - AA05
Anti-Effectively prevents galling & seizing of bolts, studs, screws, gaskets & joints on furnace equipment, exhaust systems, chemical reactors, kilns, pressure vessels & other applications.
Dpr - DD09
This multi-purpose product has penetrating, easing, water-displacing, lubricating and corrosion-preventing properties. D.P.R will loosen seized nuts and bolts and lubricate hinges, guns, mechanical movements, etc. This product also removes water from all metal surfaces and provides medium term protection against corrosion during indoor storage.
Dry film lube - D03
An aerosol product which sprays to give a quick-drying, black or dark grey coating, formulated with graphite and P.T.F.E in an acrylic binder to provide a long-lasting and durable lubricant coating.
Gear & Rope Lube - GG09
A special lubricating, water-displacing and corrosion preventive fluid for use on wire ropes and associated gear. This product is suitable for use on locked- coil wire ropes in friction and drum-winding configurations, guide and rubbing ropes, haulage and cable-belt ropes, crane & hoist wires etc.
Grease cartridges - GG06
A premium quality multipurpose grease ideal for use in all plain or anti-friction bearings, universal joints, vehicle chassis points and similar areas. Grease Cartridges are recommended for the lubrication of highly loaded industrial and automotive applications.
Guardian - GG08
A heavy, residual compounded lubricant & protective, with excellent adhesive properties.
H.t.l grease - GGIl
A premium non-melting grease especially recommended for use in all plain and rolling bearings, especially those subject to high temperatures & running at high speeds.
Hyper g2 cartridge - HHO1
High performance, multipurpose grease ideal for use in all plain or anti-friction bearings, especially those subjected to moisture, high temperatures, vibration and variable speeds, It has added extreme-pressure, anti-wear, anti-corrosion and anti-oxidation additives to deliver premium performance from this versatile grease.
Lithium grease - LL10
Good quality, multi-purpose grease ideal for use in all plain or anti-friction bearings, universal joints, vehicle chassis points and similar areas. It is also ideal as a general protective for pipe-threads and metal parts in warehouse storage or in transit.
Lubro - LL08
A high performance grease packed with specialised solid lubricants, extreme pressure additives and sulphide inhibitors, Lubro has been formulated to be free from all metal additives. Lubro is ideally suited for use as a "thread compound" providing good control of make/break torque and protecting metal surfaces effectively even in wet and extremely corrosive conditions.
Mpl - 40 - MM13
Multi-purpose product with penetrating, easing, water-displacing, lubricating & corrosion-preventing properties
Multi lube - MOl
An Aerosol product delivering a viscosified oil packed with solid lubricants. Multi Lube is ideal for use when heavier lubrication is needed but greases may not give the necessary penetration into intricate mechanisms, etc. This product is ideal for lubrication of drive chains, small mechanisms, locks and similar items.
Never-seize - NNO1
A specialised lubricant, anti-seize and anti-galling product for use in situations of high temperature (Up to 800 degrees), corrosivity and pressure.
Never-Seize is a non-melting grease filled with microscopic aluminium flakes, which provides good electrical conductivity between metal parts and prevents threads, especially, binding or seizing together.
Petroleum jelly - PP01
For the general protection of all metal parts from corrosion in storage.
Release - RR03
A fast acting penetrating, easing and lubricating fluid, Release rapidly allows the movement of tight or seized screws, nuts, bolts, hinges and all similar sorts of fitting or mechanism.This allows parts to be disassembled for repair, etc., with the minimum of effort and damage.
Shredder Lube lv - SS56
A special lubricating fluid for paper-shredders. Regular use will maintain shredder heads in optimum condition and prevent sticking and jamming due to paper-dust build-up.
Low viscosity Shredder Lube LV allows easy use via in-built sump applicators but equally may be simply applied to smaller shredders by dropper or fine brush.
Silicone - SS03
A specially selected, narrow-cut poly-dimethyl-siloxane fluid with a very wide range of applications as a lubricant, release agent and polishing or shining agent, especially for plastics surfaces. Silicone is pure silicone oil, free from solvents and thinners so it offers maximum performance and maximum value for money.
Silicone emulsion - SS13
Silicone emulsion is specially designed for use where the clean, effective properties of silicones are required, but in a water based form. It functions as a lubricant, mould release agent and anti-foam. This specific product finds a special place in the clothing industry for example, where it provides machinery lubrication without staining.
Silicone grease - SS04
Lubricates, protects from water & aggressive chemical attack & used as a mould release for small-scale applications.
Tef a100 - TO1
TEF A100 is a multi-purpose product with penetrating, easing, water-displacing, lubricating and corrosion-preventing properties. TEF A100 will loosen seized nuts and bolts and lubricate hinges, guns, mechanical movements, etc. This product removes water from all metal surfaces and provides medium term protection against corrosion.
Tef2000 - TT04
Lubricant fluid, designed for applications where high film strength coupled with low viscosity may be critical.
White grease - W01
White Grease is ideal for the lubrication of locks, hinges and mechanisms of all sorts and is especially suited for use around vehicle doors and similar situations. Inclusion of a fast-drying solvent ensures effective penetration into hinges, crevices and so on for maximum lubrication.
Alu clean - AA02
Alu Clean is a safe, fast-acting cleaner, brightener and remover for scale & tarnish from aluminium and aluminium alloy parts. Suitable for cleaning all components, from large vertical surfaces to small, individual items.
Rustex - RR05
Concentrated Rustex is specially formulated to effectively remove rust, scale and other corrosion deposits from mild steel and other acid-resistant surfaces such as plastics, ceramics or stone. Fast acting Rustex is fully inhibited to ensure quick and effective removal of corrosion without affecting the steel.
Rustex-Gel - RR06
A powerful ready-to-use gel, designed for the removal of rust, scale and corrosion deposits from most metal surfaces. Rustex-Gel is suitable for use on all ferrous metals, yellow metals and, with care, even on aluminium. This formulation allows it to be effectively used on horizontal, vertical and even overhead surfaces.
Rustex-P - RR13
Concentrated Rustex-P is formulated to effectively remove rust, scale and other corrosion deposits from a wide variety of metals and other acid-resistant surfaces such as plastics, ceramics or stone. It has a non-fuming and much less aggressive formulation than other rust removers, which allows extensive use even in the catering and food processing industries.
Steel Brite - SS14
A general purpose cleaner for stainless steel surfaces, such as kitchen and canteen worktops, sinks, fascias, doors, etc. Mild but effective Steel Brite removes greasy marks and stains, finger-marks, etc, without leaving surface streaks. Leaves surfaces clean & bright without any risk of taint to foodstuffs. Steel Brite finds uses throughout the catering trades, in kitchens and canteens, and in hotels or offices, wherever there are stainless steel doors, counters and so on.
Acetone - AA07
This material is supplied only for the following uses. For pre-paint degreasing of metals, for use as a paint thinner and for use as a brush or paint-spray equipment cleaner.
INDUSTRIAL THINNERS - 1102
Industrial Thinners are carefully prepared from pure, high grade solvents to ensure compatibility across the wide range of available cellulose re-finishing materials. They are also formulated to provide excellent gloss straight from the gun. This Product is recommended for local repair work and is also suitable for gun-wash and general clean-up work on a wide range of materials.
Iso-propanol - 1106
This material is supplied only for the following uses. For pre-paint degreasing of metals, for use as a paint thinner and for use as a brush or paint-spray equipment cleaner.
Mek - MM09
Also known as Butan-2-one.
This material is supplied only for the following uses. For pre-paint degreasing of metals, for use as a paint thinner and for use as a brush or paint-spray equipment cleaner.
Toluene - TT12
This material is supplied only for the following uses. For pre-paint degreasing of metals, for use as a paint thinner and for use as a brush or paint-spray equipment cleaner.
Vanoph-VV01
Mild gel designed to dissolve biro and felt-tip pen marks and soften many types of paint.
Combat - СС03
A water-based, low hazard product for the removal of printing ink residues from print machinery and surrounding areas. Combat can also be used as a general hard surface cleaner where its alkalinity is beneficial.
Hypo 11 - HH08
Hypo 11 eliminates microbial contamination from freshly cleaned working surfaces, utensils, equipment and building surfaces such as floors and walls. Hypo 1l has many uses in the food and beverage processing industries, catering trades, hospitals and nursing homes and wherever else that hygiene is important. Hypo 11 yields at least 11% Sodium Hypochlorite.
Hypo 15 - НН05
Hypo 15 eliminates microbial contamination from freshly cleaned working surfaces, utensils, equipment and building surfaces such as floors and walls. Hypo 15 has many uses in the food and beverage processing industries, catering trades, hospitals and nursing homes and wherever else that hygiene is important. Hypo 15 yields at least 15% Sodium Hypochlorite.
Mask it - MM01
Water-soluble Mask-it provides deodorising and odour-masking power for Sewage Treatment Works, Refuse Vehicles, Skips & Tips, Offal Processing factories and anywhere with problem offensive odours for workers or the surrounding population.
Odor-izer - OO03 & OO05 & OO06
Odor-Izor is available in an "Apple" fragrance, a"Peach" fragrance and a "Cherry" fragrance. A concentrated re-odouriser, for the control of noxious odours on various hard surfaces and above tanks, filter-beds, etc.
Odour mask - 0001
A highly concentrated masking agent, Odour Mask controls all sorts of noxious odours in the Sewage, Waste, Farming, Fishing and similar industries.
Odour Mask can be used to deodorise sewage ponds, septic tanks, refuse tips, skips and vehicles, offal processing plants and anywhere else where odours are a problem.
Stencil Paint - S08
A fast-drying aerosol spray ink which is ideal for stencilling and other marking or identification activities.
Stencil Paint provides rapid and easy identification of items and containers for shipment and reliable presentation of lot, batch or status identification numbers. It may also be used to mark control and hazard warnings, valve identification/ direction of actuation indications and brief working instructions. (available in white/black/red/green).
Terminate - TT05
Terminates unique triple-action initially emulsifies oils and fats allowing a more rapid start to their biodegradation in digesters. Throughout the system, Terminates special agents bind to "smelly" molecules and prevent their release - making this a true de-odourising product, not just a mask. In slow-moving streams and equipment such as sludge separators, terminate releases a floating, fragrant film which further traps odours.